UB-51 Glass Plate Level Gauge/Direct Reading Level Gauge/Plate Level Gauge/Boiler Water Level Gauge
Price:Negotiable
Contact Info
- Add:安徽省天長市安徽滁州高新技術產業開發區經八路29號, Zip: 239300
- Contact: 王方海
- Tel:18226661371
- Email:ahrdyb@163.com
Other Products
Description
Additional Information
- Glass plate level gauges are suitable for directly indicating the liquid level of media in various containers such as towers, tanks, vats, and boxes. Safety steel balls are installed inside the upper and lower valves of the gauge. In the event of accidental glass breakage, the steel balls automatically close the liquid flow channel under the pressure of the container to prevent further leakage of the liquid. Based on the principle of communicating vessels, the liquid level of the medium inside the container is transmitted to the external glass plate level gauge, and the actual height of the liquid level is read from the transparent glass surface. The sealing packing for the gauge valve stem uses flexible graphite compression rings, ensuring superior sealing performance. Main Technical Parameters Measurement range (installation center distance L mm): 300, 500, 800, 1100, 1400, 1700; Nominal pressure: 2.5, 4.0, 6.4, 10.0, 16.0 MPa; Operating temperature: -20~380°C; Steel ball automatic closing pressure: ≥0.2 MPa; Heating steam pressure: ≥0.6 MPa; Heating steam jacket connection: G 1/2" (external thread); Wetted material: carbon steel or 1Cr18Ni9Ti; Connection flange: JB/T82.2-94, DN20 PN4.0 raised face flange; If other flange standards (such as GB, ANSI, HGJ) are used, please specify when ordering. Usage Instructions: After installation and before operation, slowly open the valve by turning the handwheel one full turn, then maintain this position for about 5 minutes before fully opening the valve. When assembling the glass plate during maintenance, take care to avoid uneven stress on the glass that could cause breakage when tightening the bolts. Bolts must be tightened in a cross pattern, multiple times, using a torque wrench. Ordering Information: 1. Product model and name 2. Center distance length (mm) 3. Nominal diameter DN (mm) 4. Nominal pressure (MPa) 5. Sealing form 6. Wetted material 7. Medium name or density 8. Operating temperature range 9. Accessories, remote level transmitter, and level alarm switch 10. Heating options: electric heating, jacket (steam, water, vacuum) heating, or insulation 11. Whether fasteners are included.
| Industry Category | |
|---|---|
| Product Category | |
| Brand: | |
| Spec: | UB-51 |
| Stock: | |
| Origin: | China / Anhui / Chuzhoushi |
